Lightolier Work Light C7E17VM User Manual

Calculite® HID Downlight C7E17VM  
Page 1 of 2  
7" Aperture, ED17 (Enclosed), Ceramic Metal Halide, Medium Beam  
20" (508 mm) to 30" (762 mm)  
8-1/4"  
9-3/4"  
(210 mm)  
(248 mm)  
Flangless Trim with  
Top View  
(Magnetic Ballast)  
9-7/8"  
(251 mm)  
Vertical Adjustment:  
5/8" (16 mm) to  
2 7/8" (73 mm)  
20" (508 mm) to  
30" (762 mm)  
9-3/4"  
(248 mm)  
11" (280 mm)  
(100/150W)  
Top View  
(Electronic Ballast)  
7-3/8" (187 mm) Dia.  
8-5/8" (200 mm) Dia.  
2" (50 mm) max.  
Ceiling Thickness  
Ceiling Cutout: 8" (203mm) Dia.  
Reflector Trim  
Frame-In Kit  
Lamp (Coated, Ceramic MH)  
C770MHE1 Electronic 120V  
C770MHE2 Electronic 277V  
C710MHE1 Electronic 120V  
C710MHE2 Electronic 277V  
70W ED17, BD17 (Enclosed)  
70W ED17, BD17 (Enclosed)  
100W ED17, BD17 (Enclosed)  
100W ED17, BD17 (Enclosed)  
C7E17VM CLW  
Specular Clear, White Painted Flange.  
Specular Clear, Matching Flange.  
CLP  
CCDW  
Comfort Clear Diffuse, White Painted Flange.  
Comfort Clear Diffuse, Matching Flange.  
Champagne Bronze, White Painted Flange.  
Champagne Bronze, Matching Flange.  
CCDP  
CCZW  
CCZP  
C770MHU Magnetic 120V/277V 70W ED17, BD17 (Enclosed)  
C710MHU Magnetic 120V/277V 100W ED17, BD17 (Enclosed)  
Features  
Electrical (cont)  
1. Reflector Trim: Clear anodized aluminum, 0.040” (16-ga.). Provides Medium  
beam distribution; 50° visual cut-off to lamp and lamp image; self-flange in  
painted white or polished to match cone interior. Consult factory for other  
finishes.  
Ballast  
ANSI Code Voltage Max. Amps Input Watts  
70W MH M98/M143 120/277 0.67/0.28  
100W MH M90/M140 120/277 0.90/0.43  
Magnetic Ballast: 120/277V dual voltage, 60 Hz., encased and potted,  
HX-HPF circuit type, high power factor, sound rating “B, -20°F minimum starting  
temperature, Type 1 Outdoor rating.  
78  
110  
2. Lamp Guard: High heat resistant glass (as required by code).  
3. Socket Cup: Galvanized steel, pre-wired with medium base pulse rated  
socket. Snaps onto upper reflector for secure attachment without tools;  
assures proper lamp alignment to optics for consistent performance.  
4. Mounting Ring: 0.048" (18-ga.) galvanized steel. Designed for vertical  
adjustment from above or below for ceilings from 0" to 2" thick. Center-line  
notches allow consistent alignment of multiple fixtures.  
5. Mounting Frame: 0.048" (18-ga.) galvanized steel includes pre-installed  
mounting bars.  
6. Retention Springs: Rust resistant springs secure reflector in place for quick,  
tool-less installation.  
7. Frame Vertical Adjustment Mechanism: Vertical adjustment mechanism  
accommodates mounting to virtually any ceiling system using pre-installed  
mounting bars, or 1/2" EMT tubing (by others). Single locking feature secures  
all adjustments. Alignment holes and markings allow fixture to be pre-set  
prior to installation.  
8. Mounting Bars: 0.048" (18-ga.) Pre-installed, telescoping bars extend to 30"  
long and lock securely into position. Built-in locking tabs provide positive  
attachment to common T-bar systems. Self-centering feature simplifies instal-  
lation in 24" O.C. grid systems. Attaches to steel or wood joists without  
accessories.  
Ballast  
ANSI Code Voltage Max. Amps Input Watts  
70W MH M98/143  
100W MH M90/140  
120/277 1.90/0.80  
120/277 2.40/1.10  
94  
125  
Options and Accessories  
Auxiliary: Add suffix A to Frame-In Kit and Reflector Trim. See Spec.Sheet ”A.  
Emergency Lamp: Add suffix E to Reflector Trim and Frame-In Kit. See Spec.  
Sheet “E.  
Slope Ceiling Adapters: See Specification Sheet SCA.  
Fuse (magnetic ballast): Add suffix F1 or F2 to Frame-In Kit (F1=120V, F2=277V)  
Chicago Plenum: Consult Factory.  
Labels  
UL (Suitable for Damp Locations), CSA (magnetic ballast only), I.B.E.W.  
For 100W electronic, install fixtures with minimum spacing: 2 feet from  
center-to-center of adjacent luminaries; 1/2 inch from top of luminaire to over-  
head building member;1 foot from luminaire center to side building member.  
Job Information  
Type:  
9. Ballast: Electronic 120V or 277V. Magnetic dual voltage (120V & 277V).  
Accessible from below for inspection and/or replacement without tools.  
10.Junction Box: 0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,  
90°C through branch circuit conductors; allows inspection from below.  
11.Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not  
install insulation above nor within 3" (76mm) of any part of the luminaire.  
Job Name:  
Cat. No.:  
Lamp(s):  
Notes:  
Electrical  
Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high-power factor, T.H.D.  
<15%, thermally and transient protected, RMI / RFI complies with FCC Part 18  
non-consumer equipment, shut-down circuit at end of lamp life, sound rating  
"A", -5°F minimum starting temperature, Type 1 outdoor rating.  
Lightolier a Genlyte Thomas Company  
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710  
We reserve the right to change details of design, materials and finish.  
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504  
 

Krups Hot Beverage Maker BW600 User Manual
LevelOne Computer Hardware 11g USB Adapter w LCD WiFi Detector User Manual
Life Fitness Bicycle 95CXL User Manual
Lightolier Indoor Furnishings 1101HCB User Manual
Lincoln Electric Welder 200D User Manual
LST Smoke Alarm EDS500 1 User Manual
Lumex Syatems Mobility Aid 604070A User Manual
Makita Brush Cutter EBH252L User Manual
Master Lock Electric Heater B350EAI User Manual
Melissa Blender 246 023 User Manual