Optoma Technology Projector Accessories BX AL133B User Manual

Datasheet – BX-AL133B  
BX-AL133B − Anamorphic Lens  
With Optoma’s anamorphic lens, the option to create a true  
cinematic setting is easier than ever. The Optoma  
BX-AL133B Anamorphic Lens offers true 2.35:1 aspect  
ratio in genuine movie theater style to match many of  
today’s DVD and HD offerings.  
Optoma’s BX-AL133B anamorphic lens is easy to  
install and will work perfectly with a home  
theater projector that is either sitting  
table-top or mounted. The accompanying  
(knob end to knob end)  
6.92”  
mounting bracket can be attached directly to  
the ceiling or a projector plate. A self-made riser  
block may be needed if the bracket itself does not  
allow for proper positioning.  
To use: Mount the BX-AL133B as close to the projector lens as  
possible, so that the projector beam enters the center of the rear  
lens opening. Leave enough room to tilt the anamorphic lens within the  
bracket so that the shape of the image is the same at the top and bottom.  
Four bracket mounting slots  
accept 1/4” screws  
BASIC REQUIREMENTS  
Optics:  
Patented, coated, five-element glass  
achromatic, anastigmatic design  
. The width of the projector beam should be less than three (3)  
inches from where it enters the Optoma BX-AL133B  
anamorphic lens  
Transmission:  
Minimum 20% net brightness increase  
versus standard letterbox imaging.  
System Weight: 8.5lbs. (3.9kg) with bracket  
. The recommended minimum throw distance from the  
projector lens to the screen should be at least 12 feet  
Assembled in the USA using components made in the USA and other countries.  
. The throw distance divided by the image width (“throw ratio”)  
should be at least 1.6, prior to adding the Optoma BX-AL133B  
. Before attaching the lens, the image must appear vertical  
stretched; this can be done by selecting the “LBX” aspect  
ratio from the projector’s display menu  
NOTES  
When using the BX-AL133B  
mount please follow the  
instructions for proper installation  
. Any rotation of the lens around the vertical axis will  
slightly shift the image in a horizontal direction  
. To clean: Lightly blow off any surface debris from the  
lens. If needed, clean the lens using standard camera  
cleaning supplies while the projector is on (be careful  
not to look directly into the light beam of the projector)  
Ceiling Structure or Projector Plate  
LIMITED WARRANTY  
2.75” to 4.5”  
Optoma Technology Inc., warrants this product to be free of defects in  
original workmanship and material for a period of twenty-four (24)  
months from the date of purchased. During this period, a defective unit  
may be repaired or replaced, at the discretion of Optoma Technology  
inc., by returning it in its original packaging with a copy of your receipt.  
This warranty does not cover damage as a result from lack of proper  
care, accident, misuse or any cosmetic damage not reported within  
fifteen (15) days of purchase. Damages are limited to the cost of the  
product. A service charge may be applied to any returned product  
requiring cosmetic attention or to the repair of any damage not covered  
under this warranty.  
The BX-AL133B lens is a heavy product. Use  
extreme caution if hanging from ceiling.  
www.optoma.com  
© Copyright 2009 Optoma Technology, Inc. All specifications subject to change at any time. 
 

Miele Oven H4842BP User Manual
Miele Refrigerator KF1801VI User Manual
MTX Audio Portable Speaker RT12 44 User Manual
NEC Computer Monitor AccuSync 120 User Manual
NeumannBerlin Power Supply N 149 A User Manual
NuTone Intercom System NM200AL User Manual
Optiview Security Camera IPCAM User Manual
Palsonic Flat Panel Television TFTV558HD User Manual
Panasonic VCR AG DTL1P User Manual
Paradyne Network Card MIM 2000F User Manual