StarTechcom Surge Protector RKPW161915 User Manual

Instruction Manual  
16 Outlet PDU Power Distribution Unit 125V 15A (12A UL)  
RKPW161915  
Front View  
DE: Bedienungsanleitung - de.startech.com  
FR: Guide de l'utilisateur - fr.startech.com  
ES: Guía del usuario - es.startech.com  
IT: Guida per l'uso - it.startech.com  
NL: Gebruiksaanwijzing - nl.startech.com  
PT: Guia do usuário - pt.startech.com  
Reset switch  
Surge LED  
Power LED  
Ground LED  
Rear View  
Packaging Contents  
• RKPW161915 Power Distribution Unit  
• Installation Guide  
NEMA 5-15 outlets  
System Requirements  
• 19front/rear mounting rack/cabinet (EIA 310-D compliant)  
• 125VAC power source  
*actual product may vary from photos  
Installation  
1. The power distribution unit takes up 1U of rack space, so locate an  
appropriate location on the rack and mount it against the front or  
rear mounting posts.  
2. Using the mounting hardware (screws, nuts, etc.) provided with  
your rack or from your rack manufacturer, secure the unit to the  
posts.  
Specifications  
Number of Power Outlets  
16  
3. Connect the power cable from the distribution unit to a 125VAC  
power source.  
Connectors  
16 x NEMA 5-15 female  
125VAC / 15A  
Electrical Rating  
NOTE: It is recommended that the unit be connected directly to a main  
source and not another distribution unit.  
1 x Ground (green)  
1 x Surge (red)  
1 x Power (yellow)  
4. Toggle theResetswitch on the front of the unit to theon’  
position to energize the unit.  
LEDs  
5. ThePowerandSurgeLEDs should light up to indicate surge  
protection is active. TheGroundLED should light up to indicate  
proper grounding is present.  
6. You may now attach your 125VAC compatible devices to the  
distribution unit.  
NOTE: Combined power draw from all devices should not exceed 15A,  
otherwise the built-in circuit breaker will trip.  
Operating Temperature  
Storage Temperature  
Dimensions  
-5oC to 45oC (23oF to 113oF)  
-25oC to 65oC (-13oF to 149oF)  
482.6mm x 95.5mm x 42.7mm  
2360g  
Weight  
7. In the event of an overload scenario, the built-in circuit breaker  
will be tripped and power to all outlets will be stopped.  
8. Disconnect the problem device or all devices from the distribution  
unit and toggle theResetswitch to turn the ports back on.  
Manual Revision: 05/31/2012  
 

Soleus Air Beverage Dispenser JC 46 User Manual
Sony Automobile Battery Charger 11 User Manual
Sony Camera Lens ILCE7SB User Manual
Sony Cell Phone 1271 4771 User Manual
Sony Computer Keyboard VGP BKB1 User Manual
Sony Projector KP 43T75A User Manual
Sony Security Camera SNCDH120 User Manual
Sony Stereo System CDX M8800 User Manual
Stamina Products Exercise Bike 15 0200 User Manual
Stinger Automobile Accessories SGN13 User Manual