Evolution Technologies Electronic Keyboard MK 7 User Manual

EVOLUTION MK-7 MIDI KEYBOARD MANUAL  
1. General Guide  
KEYBOARD  
BACK PANEL  
1.  
WHEEL button  
2.  
SELECT button  
3.  
PITCH BEND +/- switches  
4.  
Numeric keys  
5.  
PROGRAM key  
6.  
BANK LSB key  
7.  
BANK MSB key  
8.  
WHEEL key  
9.  
SAVE key  
10.  
11.  
12.  
13.  
14.  
15.  
16.  
CHANNEL key  
OCTAVE key  
TRANSPOSE key  
+/- keys  
RESET-AC key  
GM-RESET  
MIDI OUT Connector  
For connecting directly to PC sound card game port  
17.  
18.  
DC Jack  
For connecting to AC/DC adapter. DC output 9V-1 2V, 1 50mA, centre positive.  
POWER switch  
2.  
Power Supply  
2-1  
DC Power - Batteries (not included)  
This unit is powered by 6 “AA” (UM-3) size batteries. Weak batteries will result in poor performance. When  
the power is getting weaker, replace the worn out batteries as follows:  
1.  
2.  
3.  
Remove the battery compartment cover and take out the batteries.  
Insert new batteries and make sure that the polarity is correct.  
It is advisable to replace all 6 batteries at the same time and not to mix batteries. Alkaline batteries are  
recommended for maximum performance.  
2-2  
AC Power  
You can also use AC adapter with the following specification: 9-12V DC output, 150mA, centre positive.  
Note: Do not leave the adapter plugged in for long periods of time if the unit is not in use.  
3.  
Preparation  
This unit’s MIDI OUT connector is specially for connecting to personal computers.  
 
*
8-4  
Press + and - keys simultaneously to reset the pitch to default level.  
Release the SELECT button.  
9.  
Sending a PROGRAM CHANGE number  
This function allows send any MIDI PROGRAM CHANGE 0-127.  
9-1  
9-2  
9-3  
Hold down SELECT button (2) and ...  
Press PROGRAM key (5),  
Press the numeric keys (4) to set the PROGRAM CHANGE number to be sent. Also you can use "+" or "-"  
key to change the value.  
*
9-4  
The PROGRAM value must be a three-digit number - to access PROGRAM number 7, type ‘007’.  
Release the SELECT button. The PROGRAM CHANGE MESSAGE is sent to connected equipment.  
Note: If the number you input is over 127, it will retain previous LSB or MSB.  
10.  
Sending BANK MSB and LSB Message  
This allows you send any value of MSB or LSB each from 0-127.  
10-1 Hold down SELECT button (2) and press BANK LSB key (6). Press numeric keys (4) to change the LSB  
value. Then release the SELECT button.  
10-2 Hold down SELECT button (2) and press BANK MSB key (7). Press numeric keys to change the MSB value.  
Then release the SELECT button.  
11.  
PROGRAM & BANK CHANGE Memory  
You can assign a selected PROGRAM CHANGE as well as a BANK LSB and a BANK MSB to one of six  
numeric keys (0-5).  
11-1 Select the required PROGRAM CHANGE, BANK LSB and MSB to relevant chapter.  
11-2 Hold down SELECT button (2) and press SAVE key (9).  
11-3 Press the numeric key (from 0 to 5) you wish to assign to. Release the SELECT button (2). Now, the  
PROGRAM and BANK CHANGE is memorized on the selected numeric key.  
11-4 By holding down SELECT button (2) and press this numeric key, you can send the desired PROGRAM and  
BANK CHANGE.  
12.  
Specifications  
Keyboard:  
Control:  
37 mid-size keys  
WHEEL, MIDI CHANNEL, PROGRAM, MEMORY, TRANSPOSE, OCTAVE, BANK LSB, BANK MSB,  
RESET-AC, GM-RESET, PITCH BEND, WHEEL Switch, POWER SWITCH.  
DC IN (DC 9V)  
Jack:  
Rated Voltage: DC 9V (6 “AA” size or UM-3 batteries)  
Connector:  
Dimensions:  
Weight:  
MIDI OUT connector specially for PC sound card game port.  
469 x 105 x 39mm  
560 grams  
Note: Specifications are subject to change without prior notice.  
APPENDIX  
MIDI IMPLEMENTATION CHART  
Function  
Basic  
Transmitted  
1-16  
Received  
Remarks  
Default  
Channel  
Changed  
Default  
1-16  
----------------------------  
Mode  
Messages  
Altered  
X
***********************  
Note  
5-113  
Number  
Velocity  
True Voice  
Note ON  
Note OFF  
Keys  
***********************  
O/X  
X
X
O/X  
O
Aftertouch  
Pitch Bend  
Channels  
 
0,32  
1
2
6
7
O/X  
O/X  
O/X  
O/X  
Bank Select  
Modulation  
Breath Control  
Data Entry  
Volume  
Control  
Change  
O/X  
10  
64  
O/X  
O/X  
Panpot  
Hold 1  
Program  
0-127  
Change  
True Number  
***********************  
System Exclusive  
X
Song Position  
Song Select  
Tune  
X
X
X
Common  
Aux  
Messages  
Local ON/OFF  
All Notes ON/OFF  
Active Sense  
Reset  
X
X
O
X
Notes  
O/X can be set to O or X  
For technical support, email [email protected]  
 

Eddie Bauer Car Seat 22 750 User Manual
Electro Voice Musical Instrument Amplifier DH2A User Manual
Esoteric DVD Player D 03 User Manual
Exido Fan 271 006 User Manual
Fisher Paykel Cooktop CG122 User Manual
Fisher Price CD Player B4359 User Manual
Ford Automobile E1394 202231 User Manual
Freecom Technologies Computer Drive Mobile Drive Secure User Manual
GE Caller ID Box 2 9030 User Manual
Genesis Advanced Technologies Cordless Saw GMSUDR15L User Manual