Gianni Industries Door EB 300 User Manual

EB-300  
Surface Mount Electric Dropbolt  
Dimension  
3
EB-300  
6
14  
EB-300VGL  
2
32  
56  
2
166  
Statement  
Unit: mm  
The EB-300 electric dropbolt is designed for  
surface mount application and the EB-300VGL is  
designed for frameless glass door and glass wall  
applications.  
Solid bolt for superior strength  
Greater security is provided by the 13.5mm diameter (16mm  
bolt throw) solid stainless steel bolt with hardened magnet  
core, which has resistant to metal cutting saws. The bolt also  
rotates freely, making attempts to tamper or cut extremely  
difficult.  
Specifications  
Fail-Safe Version (Power to Lock)  
Power Input: 12 V DC  
Voltage Tolerance: 10%  
Current Draw:  
Pull in: 0.9A, Holding: 0.3A@12V DC  
(at temperature 20C  
Long life solenoids  
Door Position status output (Reed rated 0.25A@30VDC)  
indicates door opened or closed status.  
Operating Temperature: -10~+45C  
Humidity: 0~95% non-condensing.  
Lock's surface Temperature (when the power is on):  
<current temperature +20C  
Special designed solenoid for strength and long life  
operating lifetime with guaranteed 500,000 operations.  
Tested to 500000 cycles.  
Lock Delay Settings  
Auto-relocking Time Delay : 0, 3 ,6 ,9seconds  
Weight (Approx.):  
EB-300: 1.1 Kg  
The door locking delay is the time between the door being  
closed and the bolt engaging . This can be set to up to 9  
seconds at 3 second intervals by adjusting the jumpers.  
EB-300VGL: 1.7 Kg  
Auto Relocking Timer Setting  
Clamp Design  
0 seconds  
3 seconds  
6 seconds  
9 seconds  
When the bolt is extended to keep the door locked, it draws  
only 0.3A in a holding mode down from 0.9A while the bolt is  
retracted. This design both protects the power supply and  
extends the life of the electric dropbolt.  
Smart Circuitry  
The vandal resistant circuitry means the door close sensor  
can't be fooled into projecting the electric dropbolt unless the  
door is actually closed. The reed sensor automatically  
disconnects after the bolt is projected to enhance security of  
the lock.  
Pull in  
Holding  
Sensor  
Vandal resistant  
circuit design  
Time (seconds)  
GIANNI INDUSTRIES, INC.  
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,  
Tu-Cheng City, Taipei, Taiwan 23678  
The products are manufactured under an ISO  
9001  
&
QC 080000 Certified Quality  
Management Program environment back its  
product quality, performance and commitment  
to customer satisfaction.  
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876  
Website: gianni.tw  
Copyright 2008 Gianni industries, inc. All rights reserved.  
DM-CA-EB-300 Ver. E Published on 2008.10.20  
 

Eclipse Fujitsu Ten Car Stereo System CD5415 User Manual
Electrolux Convection Oven LW 6 GN 1 1 ELECTRIC User Manual
Electro Voice Home Security System P 1200 User Manual
Estate Refrigerator 2173445 User Manual
Everpure Water System SO 204 User Manual
Frigidaire Double Oven FEB30T5GCC User Manual
Fujitsu Battery Charger FMW51BC1 User Manual
Gateway Flat Panel Television 30 inch LCD TV User Manual
GE Monogram Refrigerator ZISS420DRSS User Manual
GE Washer Dryer WSM2420S User Manual